Share this
If you want to learn more, please visit our website.
| Print this
Selecting Welding Wire
Welder wire classification may seem daunting at first, but they are actually rather straightforward. American Welding Society (AWS) classifies filler metals for arc welding processes, and each filler metal has its classification. However, some filler metals share the classification name for more than one welding process, while others are classified according to the welding process. For example, some wires for TIG welding share the same classification as spools of MIG wires, while flux-cored or metal-cored wires have unique designations.
AWS Filler Metal Specifications By Material and Welding Process
There are many AWS filler metal specifications, but the list below outlines the most often applied filler metals and their AWS specifications:
AWS also has specifications for aluminum, low-alloy steel, cast iron, nickel alloys, copper, and other materials. However, solid, metal-cored, and flux-cored wires are most often used to weld steel and stainless steel. So, this guide below will focus on these two materials and different gas-shielded and self-shielded wires.
How To Read AWS Filler Wire Specifications
American Welding Society filler wire specifications follow a uniform pattern for their filler metal designations. While the AWS alpha-numerical designations may seem intimidating initially, they are relatively easy to read once you get the hang of the AWS system.
We will discuss each designation on examples soon. But lets quickly go through the essential alpha-numerical markers you can find on solid, flux-cored, and metal-cored wires.
The first letter(s) can be E, as electrode, R as welding rod, or an EC, which indicates a metal-cored electrode.
Solid carbon steel electrodes indicate a tensile strength in increments after the first letter. Usually, its 70, as 70,000psi. However, stainless steel electrodes designate the composition of the weld metal after the first letter. For example, 308 austenitic stainless steel filler metal alloy.
Carbon steel electrodes have the letter S, which indicates that the filler metal is solid, while the letter C indicates a composite. What follows is one of the following digits: 2, 3, 4, 6, 7, or letters G or GS, and these indicate the chemical composition. GS means that the filler metal is for single-pass welds only.
The letter T indicates that the wire is a flux-cored welding electrode. The number after this letter designates the recommended welding position 0 means flat and horizontal, while 1 is an all-position electrode.
Stainless steel wires may also have letters L, H, and LR in their name. The letter L indicates a lower carbon content, the letter H indicates higher carbon content, and the letters LR indicate low residuals.
If youve ever picked up a MIG torch, chances are high that youve welded with the ER70S-6 solid welding wire. This wire is widely used for repair jobs and joining thin sheet metal, especially when welding slightly contaminated base materials. The added silicon provides better puddle fluidity and higher resistance to weld contamination. So, lets see how to read its specification from left to right:
E = electrode can be a carrier of electricity.
R = rod it does not have to be an electrode to be used as weld metal. An example would be cutting the solid wire into 50 cm sections for gas tungsten arc welding (GTAW).
70 = 70,000 as-welded tensile strength in pounds per square inch.
S = solid, not tubular.
-6 = variation of chemical composition; for instance, an ER70S-6 wire has more silicon than an ER70S-2.
Stainless Steel Solid Welding Wire Electrode Designation Example:
If you weld stainless steel, you know about the ER308LSi welding wires. This filler metal is often used for its smooth arc characteristics thanks to its higher silicon content. The ER308LSi is an excellent choice for applications where finish quality and aesthetics are paramount. But lets see how to read its specs from left to right:
E = electrode it conducts electricity.
R = rod it does not have to be an electrode to be used as weld metal. An example would be cutting the solid wire into 50 cm sections for gas tungsten arc welding (GTAW).
308 = The stainless steel alloy of the welding wire.
L = low carbon, as opposed to H, which would be high carbon.
Si = higher than normal amounts of silicon improves the wetting of the weld puddle.
Metal-Cored Arc Welding Wire Example:
A common low-carbon steel metal-cored arc welding wire is E70C-6M-H4, designed for high travel speed applications with minimum spatter, provides excellent arc for automated and manual welding. Its specs from left to right are:
E* = electrode it conducts electricity.
Jinertai Product Page
*Note that there is no R following the E in E70C-6M-H4; this is because this wire must be used as an electrode.
70 = 70,000 as-welded tensile strength in pounds per square inch.
C = composite, as opposed to solid.
-6 = variation of chemical composition.
M = shielding gas type; M means a blend (typically 75% Argon/25% CO2), and C designates 100% CO2.
-H4 = maximum diffusible hydrogen level of 4 ml/100 grams of weld metal.
Gas-Shielded Flux-Cored Welding Wire Example:
The E70T-1C-JH8 is typically used for heavy-duty structural fabrication and shipbuilding and makes a good example of a gas-shielded flux-cored arc welding wire. It offers exceptional arc performance and bead appearance at high deposition rates. This wire generates low fumes and works with a 100% CO2 shielding gas, which reduces operational costs and improves weld penetration. So, lets see how to read its specs from left to right:
E* = electrode; this means that it is capable of being a carrier of electricity.
*Note that there is no R following the E in E70T-1C-JH8; this is because this wire must be used as an electrode.
7 = 70,000 as-welded tensile strength in pounds per square inch.
0 = With flux-cored arc welding wires, the digit after the as-welded tensile strength designation is used to define the welding position capability of the wire; a 0 indicates flat or horizontal only, whereas a 1 indicates all positions, including vertical and overhead.
T = tubular, as opposed to solid.
-1 = operating attributes; can help determine the electrical polarity that should be used for best performance and other welding attributes relative to other flux-cored wires
C = shielding gas type; C designates 100% CO2, M means a blend (typically 75% Argon/25% CO2).
-J = indicates that the welding wire is notable for its impact strength and toughness at cold temperatures relative to wires without the J designation.
H8 = maximum diffusible hydrogen level of 8 ml/100 grams of weld metal.
Self-Shielded Flux-Cored Welding Wire Example:
A typical example of a self-shielded flux-cored wire is E71T-14. With its soft, consistent arc and fast travel speed abilities, the E71T-14 is used in many automated and manual welding applications. Reading its specification from left to right is similar to the gas-shielded flux-cored wire above, but it doesnt have a designation for the shielding gas.
E* = electrode this means that it can be a carrier of electricity.
*Note that there is no R following the E in E71T-14; this is because this wire must be used as an electrode.
7 = 70,000 as-welded tensile strength in pounds per square inch.
1 = The digit after the as-welded tensile strength designation defines the welding position capability of the wire; a 0 indicates flat or horizontal only, while 1 indicates all positions, including vertical and overhead.
T = tubular, as opposed to S, which means solid; the flux-cored wire must be tubular because the flux is deposited in its core.
-14 = operating characteristics; this is an arbitrary number used to relate to other flux-cored wires.
Get Your Equipment From Red-D-Arc
You can find any welding wire you need here, including wires for stainless steel, bronze, and aluminum alloys. We stock wires from Lincoln Electric, Hobart, ESAB, and other renowned manufacturers for your peace of mind clean, uniform, and protected from oxidation wires provide far better welding results than off-brands with questionable production quality.
Investing in welding equipment is a crucial investment for any welder, whether youre a professional welder or a DIY enthusiast. With Red-D-Arc, you can rest assured that you are getting high-quality equipment from top manufacturers. Whether you need welding machines, wire, or other accessories, Red-D-Arc has a vast selection to choose from. Contact us today to learn more.
You can find a range of welding wire options here.
Red-D-Arc, an Airgas company, rents and leases welders, welding positioners, welding-related equipment, and electric power generators anywhere in the world. Our rental welders, positioners and specialty products have been engineered and built to provide Extreme-Duty performance and reliability in even the harshest environments, and are available through over 70 Red-D-Arc Service Centers, strategically located throughout the United States, Canada, the United Kingdom, France, and the Netherlands, as well as through strategic alliances in the Middle East, Spain, Italy, Croatia, and the Caribbean. From our rental fleet of over 60,000 welders, 3,700 weld positioners, and 3,700 electric-power generators, we can supply you with the equipment you need where you need it when you need it.
Share this
| Print this
Hobart® ER308/ER308L Stainless Steel TIG Welding Wire 1/16 Diameter - 10# Tube S-I12Genuine Hobart® ER308/ER308L 1/16" diameter X 36" length stainless steel TIG welding wire for welding type 304 and 308 stainless steel. ER308/ER308L can also be used for welding 201 and 302 stainless, as well as some 300 series dissimilar stainless steels. It has a low carbon content to minimize intergranular corrosion.Each 36" length is stamped with AWS classification and manufacturing lot number.Food and BeveragePetrochemical plantsPulp and PaperOther general fabrication on stainless steels.
The company is the world’s best ER308L stainless steel wire for general fabrication supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.