For more information, please visit well.
A critical refractory anchor is seen on refractories either located on the roof or vertical walls, because they are required to support the weight of a refractory. The temperatures and the operation conditions are stressful, and so, the material is to be sturdy for such a critical operation. Usually, the cross-section of the anchors is either rectangular or circular. The cross-section is dependent on the application. For example, if the cross-section of the anchorage is a circle, the refractory has a lower thickness. Therefore the circular type offers lesser weight support per unit area. Contrast to a circular cross-section, a rectangular variety, is chiefly useful for a refractory that has a higher thickness. Hence, the weight support offered by a rectangle cross-section is higher than that of a circular cross-section.
Raw material used to Manufacture a Refractory anchor is Stainless Steel 304 Refractory Anchor, Stainless Steel 304H Refractory Anchor, Stainless Steel 310 Refractory Anchor, Stainless Steel 310S Refractory Anchor, Stainless Steel 321 Refractory Anchor, Stainless Steel 330 Refractory Anchor, Inconel 600 Refractory Anchor, Inconel 601 Refractory Anchor. We also manufacture Refractory anchors from raw materials like CS, 304, 304L, 309, 309S, 310, 310S, 316, 316L, 321, 321H, 347, 347H, 446, 235MA, 800, 601 and more as per customer requirements. Customers can send us drawings, Samples, Sketches.
For more Refractory Anchors Manufacturerinformation, please contact us. We will provide professional answers.
Refractory Anchors are usually used in following:
Kilns, furnaces, incinerators, reactors, cement plants, Thermal power Plant, Oil and Gas, Boilers, Petrochemical, Shipbuilding, Fertilizers, Steel Plants, Mining Plants, Etc
Want more information on Melt Extract Steel Fiber? Feel free to contact us.