Polyurethane systems are the result of the reaction between two chemical components, isocyanate and polyol. The best known applications of polyurethane are by projection (Sprayed Polyurethane Foam) and by injection, the one that concerns us in this article.
Click here to get more.
Injected polyurethane is applied in situ. The components are mixed directly on site and the mix is injected through a series of cavities into the building element that we want to insulate. Once injected, the foam expands resulting in a rigid and durable insulation system.
Polyurethane foam has a very low thermal conductivity due to its cellular structure together with the gas retained between these cells. Thanks to this low thermal conductivity, injected polyurethane is an optimal thermal insulation material.
Injected polyurethane contributes to reduce noise pollution. Low density injected polyurethane and open cell foams are the most suitable for acoustic insulation, and may have an absorption coefficient of up to α = 0.5.
That is why injected polyurethane is an excellent solution against extreme noises. In this case, it increases the acoustic insulation of the building for frequencies between 7 and 9 dB, while dampening the vibrations produced by sound waves.
Closed cell injected polyurethane is one of the best materials to meet the degree of impermeability of façades established by regulations.
In addition, injected polyurethane also acts as a moisture regulating membrane, being waterproof and vapour permeable at the same time. The degree of permeability can be reduced by increasing the density of the foam and the content in closed cell, thus adapting to the climatic conditions of each area.
Although many people may think otherwise, polyurethane is safe in all its applications. Polyurethane insulation systems manufactured by Synthesia Technology have obtained an Euroclass ranging from E to C, which certifies a range of good behavior against fire.
On the other hand, insulation is only one of the parts of a constructive element (for example, of a façade), which means that the reaction against fire of the constructive assembly will depend also on other factors, such as the applied covering material.
Thanks to its hygrothermal properties, injected polyurethane meets the requirements of legislation to guarantee indoor air quality inside buildings. Another great advantage in the field of health, compared to other insulators such as mineral wool, is that injected polyurethane does not release fibers, nor is it attractive to rodents, insects and other living beings that could damage the insulation.
In addition to the fact that its use contributes to reduce energy consumption in buildings, polyurethane waste can be reused as a load in high density panels. Moreover, polyurethane systems made by Synthesia are free of CFCs and HCFCs, so they are 100% safe for the environment.
Injected polyurethane has a high resistance against most chemicals. If we talk about materials used in construction, injected polyurethane can stand most of the strong mineral acids and solvents used. It is also resistant to mildew and to the action of roots, which makes it exceed the useful life of the building as it is a rot-proof material, stable against detritus, odorless and resistant even in the most aggressive industrial environment.
Huichen are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
Adhesion is one of the main competitive advantages of injected polyurethane compared to other insulating materials such as mineral wool, which can present settlements and detachments. Thanks to its physical properties, polyurethane foam completely adapts to the surface to be covered, creating a layer of continuous insulation, rigid and fully adhered to the walls of the element, without the need for auxiliary elements.
Injected polyurethane is easy to apply in areas with difficult access, which explains the rise of its use in the renovation of buildings that do not have any thermal insulation.
The most common application is the injection of polyurethane in the air gap of façades: with only a few holes, polyurethane foam is injected into the air gap and it expands reaching every corner, so that the wall is perfectly insulated and repaired.
This function of "wall repairing" or stabilizer is due to the fact that polyurethane foam expands and gets into the cracks that have been caused over time.
All the aforementioned characteristics turn injected polyurethane systems into an optimal solution for insulation, whether in new or in existing buildings. The Phono Spray I-905 System is an example of this:
for further information on polyurethane systems for thermal insulation or you can download the video of a real case of polyurethane application:
Want more information on polyurethane insulated panel? Feel free to contact us.
Chain Slings Suppliers Check now Click here excavator ripper for sale Read more hnbr power steering seal View Details china seeds manufacturers chinese spinach seeds manufacturer Chinese Fresh Pearl Pear Sweet Snow Pear Lifting Chain Manufacturer more details Low Ankle Carbon Fiber Foot with Aluminum Adapter high ankle carbon fiber foot supplier Prosthetic Equipment Constant Temperature Water Tank