My tastes (and requirements) are a bit more pedestrian. I've got a nice Craftsman steering wheel puller set, and a Craftsman harmonic balancer puller/installation set.
I also have a Craftsman 3-jaw puller. I store all these in a plastic utility box (also from Sears), along with all the fasteners/bolts I'll need for the particular jobs (they came with the puller sets). They've done exactly what I've needed them to do, with no problems.
I also have a big ol' Snap On 2-jaw puller that weighs about 8 pounds. It's been used a few times to pull off pinion yokes and pitman arms.
I would very much like to get a dedicated Pitman arm puller... I'm 39, I've pulled about 8 or 10 off over the years, and if I can find a nice one priced cheap, I'd like to have it.
I also have a small, cheap battery terminal puller. THAT thing is worth it's weight in gold. Clamps on and removes batter terminals without screwing up the soft lead. I think I got it out of the dollar tool bin at a parts store.
I've got a slide hammer, and there have been a few times where I would have liked having an axle puller attachment. There have also been some times where I would have liked having a brake drum puller, though I did acquire a nice pair of KD brake drum pry bars that have really done the job over the last few years.
-Brad
Want more information on puller supplier? Feel free to contact us.
The control lever operates in an On and Off position only.
MAINTAIN A SAFE DISTANCE. With arms extended, you should not be able to touch the 8” black puller sheave when it is turning. This is very important. Clothing and gloves need to be a snug fit with no hanging cords, etc. to avoid getting caught in the spinning 8” black puller sheave, idler roller or davit pulley block.
Install the line through the davit pulley block, then under the plastic idler roller, then over the 8” black puller sheave Move the control lever to the on position to raise the pot. As the pot is being raised, keep a slight tension on the line coming over the top of the 8” black puller sheave.
MONITOR incoming line closely for weights, snares and pot. Never allow weight, line snare or pot to reach the davit pulley block. Use davit in locked position only. NEVER have hands around or in front of 8” black puller sheave, idler roller or davit pulley while pulling pot.
For more information, please visit 4 inch magnetic bowl.
When pot is up, TURN CONTROL OFF before bringing pot into boat.
Keep your eyes on the puller at all times during operation. DO NOT LOOK AWAY.
This unit should not be operated by anyone not familiar with the operation of the EZ-Pull Pot Puller. Do not allow operation by anyone under the influence of any drugs or alcohol, by anyone who lacks the physical abilities to safely operate this puller or by minors.
Rope must be in good condition. Most commonly used sizes are 1/4” and 5/16”, poly or nylon, twist or braided. Always check the s/s hardware holding the davit pulley block to be sure it is secure. PRACTICE operation to become familiar with the unit is advised before going fishing.
IF YOU HAVE ANY QUESTIONS REGARDING THE SAFE OPERATION OF THIS UNIT, PLEASE CALL YOUR DEALER.
The use of any plug configuration other than the optional plug package sold by manufacturer of EZ-Pull Pot Puller will nullify your warranty.
Contact us to discuss your requirements of large volume sand blasters cabinet supplier. Our experienced sales team can help you identify the options that best suit your needs.