Product Features
NAILI Product Page
1. The micro-heat regeneration adsorption air dryer is an energy-saving product designed and developed by our company.
2. This series of products has the advantages of thermal regeneration and non-thermal regeneration. It adopts the form of micro heating for the regeneration gas, thereby reducing the consumption of regeneration air and achieving the purpose of energy saving.
3. It avoids the shortcomings of short switching time of heatless regeneration desiccant air dryer and large loss of regenerative air, and also avoids the disadvantage of large power loss of heat regenerative air dryer.
Contact us to discuss your requirements of china air compressor air dryer suppliers. Our experienced sales team can help you identify the options that best suit your needs.
4. The dryer has reasonable switching time and low consumption of regeneration air. It is currently the most economical energy-saving adsorption dryer in the purification industry. It is widely used in metallurgy, power, electronics, food, chemical and petroleum.
Regenerative-desiccant-type dryers are the primary choice for compressed air users within the pharmaceutical, chemical, and food and beverage manufacturing industries.
They feature a porous desiccant that adsorbs the moisture by collecting it in its myriad pores, allowing large quantities of water to be retained by a relatively small quantity of desiccant. The desiccant medium has a finite capacity for adsorbing moisture before it must be dried out or regenerated. Normally, the desiccant is contained in two separate towers. Compressed air to be dried flows through one tower while the desiccant in the other is being regenerated. This is accomplished by reducing the pressure in the tower and passing previously dried purge air through the desiccant bed.
The regeneration air may also be heated, either within the dryer or externally, to reduce the amount of purge air required. Regeneration air may also be supplied by a blower and dryers of this type normally have a regeneration cycle, which can be based upon time, dew point or a combination of the two. The regeneration method depends on the type of desiccant dryer: heatless desiccant dryers or heated blower purge dryers.
Are you interested in learning more about vane type compressor? Contact us today to secure an expert consultation!