How to Master the Art of Concrete Polishing: Hand Tools?
Concrete polishing is an excellent choice for enhancing the aesthetics of floors, walls, and countertops. Similarly, it also enhances their durability by making them stain-resistant and easy to clean. In this article, we will guide you through the process of concrete polishing using hand tools.
Step 1: Choose the Right Hand Tools.
Choosing the right hand tools is crucial for achieving the best results in concrete polishing. The most common hand tools used in this process include a hand-held polisher, sanding disks, and diamond polishing pads. You will also require a quality dust mask, safety goggles, and ear protection.
Step 2: Surface Preparation.
The achieved result in concrete polishing is directly related to the surface preparation process. Firstly, silk tape all the baseboards and coverings with plastic sheets to protect them from dust. Secondly, use a high-quality concrete cleaner and degreaser to remove all sorts of debris, oils, and grease from the floor. After cleaning, sand the floor with a 40-grit sanding pad to remove the roughness and create an even surface. .
Step 3: Polishing.
Switch the 40-grit sanding disk with a 200-grit sanding disk and run it over the surface to remove any scratches or marks. Afterward, change it with a 400-grit sanding disk to achieve smoothness and prepare the floor for polishing. Finally, use the diamond polishing pads as you progress through the grits of 800, 1500, and 3000. Change the pads regularly, always following the grit number order, and polish the entire surface uniformly with each pad before moving on to the next one.
Step 4: Finishing.
Once you have finished polishing the floor with diamond pads, use a burnisher for applying a single coat of viscous topical sealant. The sealant will enhance the surface's gloss and make it resistant to stains and scratches.
Step 5: Final Touches.
Allow the sealant to cure for 24 hours or as advised by the manufacturer. Then use a clean microfiber cloth to remove the film of the topical sealant and give your floor the final touches.
Conclusion.
While concrete polishing is a complex process, the right choice of hand tools, coupled with proper surface preparation and polishing and finishing techniques, produces outstanding results. By following the above steps, you can master the art of concrete polishing and obtain floors, walls, and countertops that are durable, attractive, and easy to clean.
If you are looking for more details, kindly visit concrete polishing hand tools, diamond grinding tools products, diamond cutting tools manufacturers.